V4 Submersible Pump Manufacturers in Ahmedabad, Gujarat – Complete Buying Guide
Introduction
A steady water supply is important for farms, homes and many business sites. When water is stored deep underground, a submersible pump can help lift it to the surface for daily use. If you are searching for V4 Submersible Pump Manufacturers in Ahmedabad, Gujarat, it is important to choose a pump that fits your borewell, matches your water needs and works with your power supply.
Orbit Submersible Pumps & Motors offers V4 submersible pumps for deep borewell applications, irrigation, home water supply and pressure-boosting systems. This buying guide explains the main features of the Orbit V4 pump, where it can be used and what to check before placing an order.
What Is a V4 Submersible Pump?
A V4 submersible pump is a slim pump designed for borewells with a narrow inside diameter, commonly around four inches. The pump and motor are lowered below the water level. The unit then pushes water through a delivery pipe to a tank, irrigation system or building. Since the pump works underwater, the correct installation depth, power supply and water conditions are important.
The term V4 is mainly linked to the pump’s size class, but the exact outside diameter can differ by model. Always check the actual pump dimensions and your borewell casing size before buying.
Orbit V4 Submersible Pump: Key Specifications
Orbit’s official product page lists the following specifications and features for its V4 submersible pump:
| Power range |
0.5 HP to 3 HP for single-phase; 1 HP to 7.5 HP for three-phase |
| Maximum immersion depth |
10 to 200 metres |
| Maximum outer diameter |
96 mm |
| Stator shell |
SS 304 stainless steel |
| Motor shaft |
SS 420 stainless steel |
| Winding wire |
Polypropylene copper |
| Stamping |
CRNO |
| Thrust bearing |
Carbon |
| Protection rating |
IP68 |
| Maximum water temperature |
35°C |
| Speed |
2850 RPM |
| Single-phase supply |
220–230 V, 50 Hz |
| Three-phase supply |
380–415 V, 50 Hz |
Orbit also lists a water-lubricated motor pre-filled with clean water mixed with anti-corrosion fluid, a pressure compensation diaphragm and a high-efficiency electrical design. Single-phase models require a control box. Specifications may vary by model, so confirm the current product sheet and performance chart with Orbit before ordering.
Benefits of Choosing a V4 Submersible Pump
1. Slim Design for Narrow Borewells
The V4 format is useful where the borewell casing has limited space. Orbit lists a maximum outer diameter of 96 mm, but buyers should check the actual unit size and the borewell’s inside diameter to make sure the pump can be installed safely.
2. Durable Stainless Steel Parts
The SS 304 stator shell and SS 420 motor shaft are selected for strength and resistance to corrosion. These materials can support reliable operation when the pump is installed and used within the recommended conditions.
3. Water-Lubricated Motor Design
The motor is pre-filled with clean water mixed with anti-corrosion fluid. Water-lubricated radial and thrust bearings support smooth operation. Follow the manufacturer’s instructions for installation, operation and maintenance to help protect the motor.
4. Protection for Submerged Operation
The listed IP68 protection rating is designed for submersible use. The pump still needs correct cable connections, suitable electrical protection and installation within the recommended depth and temperature limits.
5. Options for Different Water Needs
The listed horsepower range gives buyers options for different applications. The right model depends on the required flow and total head, not horsepower alone. Ask for help selecting the pump that matches your borewell and daily water use.
Where Can You Use an Orbit V4 Pump?
The Orbit V4 submersible pump is listed for several water supply needs, including:
- Agricultural irrigation for fields and farms
- Drip and sprinkler irrigation systems
- Residential water supply
- Pressure-boosting units
- Gardens and horticulture
- Fountains and water features
- Industrial water supply
- Selected mining and oil and gas applications, where the setup is suitable
For any special application, share the water quality and site conditions with the supplier. The product page lists a maximum water temperature of 35°C; other operating limits should also be checked before use.
How to Choose the Right V4 Submersible Pump
1. Check borewell diameter
Measure or confirm the casing’s inside diameter. Compare it with the actual pump diameter and leave enough room for safe lowering and removal.
2. Know the water level and depth
Share the pumping water level and planned installation depth. The maximum immersion depth is not the same as the total head the pump can deliver.
3. Estimate your water demand
Think about how much water you need per hour or per day. Homes, small farms and irrigation systems can have different flow needs.
4. Choose the correct HP
Select horsepower based on the required flow, total head and pipe layout. A qualified pump professional can use the pump performance chart to recommend a suitable model.
5. Confirm your power supply
Orbit lists single-phase options from 0.5 HP to 3 HP and three-phase options from 1 HP to 7.5 HP. Check the voltage, phase and control-box requirements before ordering.
6. Ask about installation and service
Confirm warranty terms, availability of parts, delivery details and installation guidance. Use a qualified installer and suitable electrical protection.
Why Contact Orbit Among V4 Submersible Pump Manufacturers in Ahmedabad, Gujarat?
When comparing V4 Submersible Pump Manufacturers in Ahmedabad, Gujarat, look at the technical details, material quality, model options and support available before and after purchase. Orbit Submersible Pumps & Motors is based in Ahmedabad and offers V4 submersible pumps for borewell, agriculture, residential and industrial water supply needs.
Before buying, tell Orbit your borewell diameter, water level, required flow, total head and available power supply. Ask for the current price, model recommendation, performance chart, warranty details and availability. These details will help you choose a pump based on your actual needs rather than price alone.
Contact Orbit Submersible Pumps to Buy a V4 Pump
Orbit Submersible Pumps & Motors
Product page: https://orbitsubmersiblepump.com/product/v4-submersible-pump/
Phone: +91 97144 63329
Phone: +91 99984 07644
Email: info@orbitsubmersiblepump.com
Contact Orbit to request a quotation, confirm the latest V4 specifications and get help choosing a model for your borewell or water supply system.
Conclusion
The right V4 submersible pump can help provide a steady water supply for agriculture, homes and other applications. Before buying, check borewell size, water level, required flow, total head, HP, voltage and the pump’s construction. These simple checks can help you select a suitable model and avoid installation problems.
If you are looking for V4 Submersible Pump Manufacturers in Ahmedabad, Gujarat, contact Orbit Submersible Pumps & Motors for product information and a quotation. Share your site details with the team so you can choose the right V4 pump for your needs.
Frequently Asked Questions (FAQs)
Who manufactures V4 submersible pumps in Ahmedabad, Gujarat?
Orbit Submersible Pumps & Motors offers V4 submersible pumps from Ahmedabad, Gujarat. Contact the company to confirm current models, availability and pricing.
What is the HP range of the Orbit V4 submersible pump?
Orbit lists 0.5 HP to 3 HP for single-phase models and 1 HP to 7.5 HP for three-phase models. Confirm the exact model before ordering.
How deep can the Orbit V4 pump be immersed?
The product page lists an immersion range of 10 to 200 metres. Confirm the correct installation depth and pump performance for your borewell.
What is the outside diameter of the Orbit V4 pump?
Orbit lists a maximum outer diameter of 96 mm. Check the exact model dimensions and borewell casing inside diameter before installation.
What materials are used in the V4 submersible pump?
The listed materials include an SS 304 stator shell, SS 420 motor shaft, polypropylene copper winding wire, CRNO stamping and a carbon thrust bearing.
Can a V4 submersible pump be used for agriculture?
Yes. Orbit lists irrigation, drip and sprinkler systems, gardens and horticulture among its applications. Choose the model based on your required flow and total head.
How can I buy an Orbit V4 submersible pump?
Visit https://orbitsubmersiblepump.com/product/v4-submersible-pump/, call +91 97144 63329 or +91 99984 07644, or email info@orbitsubmersiblepump.com to request a quotation.
