V5 Submersible Pump Manufacturers in Ahmedabad, Gujarat – Complete Buying Guide
Introduction
Choosing the right submersible pump is important when you need a steady water supply for farming, a home, or an industrial site. A pump must match your borewell size, water level, required flow and available power supply. If you are searching for V5 Submersible Pump Manufacturers in Ahmedabad, Gujarat, this guide will help you understand the key features to check before you buy.
Orbit Submersible Pumps & Motors manufactures water-pumping solutions for agricultural, residential and industrial needs. The Orbit V5 submersible pump is designed for applications that need dependable water lifting, a strong build and a suitable power range. Read on to learn about its specifications, uses and how to choose the right model.
What Is a V5 Submersible Pump?
A V5 submersible pump is made to work below the water level in a borewell or deep-water source. The pump and motor operate underwater and push water to the surface through a delivery pipe. This type of pump can be used where water needs to be lifted from a deeper source for irrigation, buildings or industrial supply.
The correct pump depends on more than horsepower alone. Borewell diameter, total pumping head, water demand, water quality and power supply all affect the final choice. A pump supplier can help you compare these details with the product specifications.
Key Features of the Orbit V5 Submersible Pump
The Orbit V5 is built with components selected for strength and regular operation. According to the product information on Orbit’s website, its main specifications include:
| Power range |
3 HP to 5 HP for single-phase models; 4 HP to 12.5 HP for three-phase models |
| Maximum immersion depth |
Up to 250 metres |
| Maximum outer diameter |
120 mm |
| Stator shell |
Stainless steel SS 304 |
| Motor shaft |
Stainless steel AISI 420 |
| Housing |
Graded cast iron for upper and lower housing |
| Motor base |
Stainless steel casting |
| Bearings |
Water-lubricated radial and thrust bearings |
| Protection rating |
IP68 |
| Speed |
2900 RPM |
| Maximum water temperature |
35°C |
Specifications can vary by model and configuration, so confirm the exact rating and operating conditions with Orbit before placing an order. Check the official product page for the latest details: https://orbitsubmersiblepump.com/product/v5-submersible-pump/
Benefits of Choosing a V5 Submersible Pump
1. Suitable for Higher Water Demand
The V5 range includes higher-horsepower options for applications that need more water than a small pump can provide. The correct output will depend on the selected model and the head and flow required at your site.
2. Corrosion-Resistant Components
The SS 304 stator shell and AISI 420 stainless steel shaft are designed to provide resistance to corrosion. The pump’s construction can support reliable service when it is installed and used according to the manufacturer’s guidance.
3. Water-Lubricated Bearings
Water-lubricated radial and thrust bearings help the motor run smoothly under suitable operating conditions. Correct installation, clean water and regular checks remain important for the working life of any pump.
4. Designed for Submerged Operation
The IP68 protection rating and pressure compensation diaphragm are features intended for submersible motor operation. The pump must still be installed at the recommended depth and within its stated limits.
5. Efficient Electrical Design
Orbit lists a high-efficiency electrical design intended to help reduce operating costs. Actual energy use depends on the selected horsepower, pump duty, installation, water demand and local power conditions.
Where Can a V5 Submersible Pump Be Used?
The Orbit V5 submersible pump is listed for a range of water-pumping needs, including:
- Agricultural irrigation for farms and fields
- Residential water supply and pressure-boosting systems
- Sprinkler systems and garden watering
- Fountains and other water features
- Industrial water supply
- Mining and oil and gas applications
- De-watering, where the pump setup and water conditions are suitable
Before selecting a pump for a special or demanding application, share the site conditions with the manufacturer. The water should be within the product’s permitted temperature and operating limits.
How to Choose the Right V5 Submersible Pump
Check the borewell diameter
Confirm that the borewell casing has enough clear space for the pump. Orbit lists a maximum outer diameter of 120 mm for the V5 model; check the exact unit dimensions before installation.
Know the pumping depth and head
Share the water level, required delivery height and pipe layout. The maximum immersion depth is not the same as the total head the pump can deliver, so ask for a model selection based on your actual duty point.
Select the correct horsepower
Do not choose HP based only on borewell depth. Match the pump to the required flow, head and daily water demand.
Confirm the power supply
Orbit lists single-phase and three-phase options in different HP ranges. Check your available voltage and phase before ordering.
Review installation and service needs
Use a qualified installer, follow the product manual and ensure suitable cable, pipe, protection and control equipment are selected.
Why Contact Orbit Submersible Pumps in Ahmedabad, Gujarat?
If you are comparing V5 Submersible Pump Manufacturers in Ahmedabad, Gujarat, look for clear specifications, help with model selection and access to product information. Orbit Submersible Pumps & Motors offers V5 submersible pump solutions for agricultural, residential and industrial applications. Its Ahmedabad base makes it a practical contact for buyers looking for product details and a quotation.
When you contact Orbit, keep your borewell diameter, water level, required flow, delivery height, power supply and application details ready. This helps the team guide you towards a suitable configuration. Ask for the current price, availability, warranty terms, delivery details and installation guidance before confirming your purchase.
Contact Orbit Submersible Pumps to Buy a V5 Pump
Orbit Submersible Pumps & Motors
Website: https://orbitsubmersiblepump.com/product/v5-submersible-pump/
Phone: +91 97144 63329
Phone: +91 99984 07644
Email: info@orbitsubmersiblepump.com
Visit the V5 product page or contact Orbit directly to request a quotation and confirm the model that fits your requirements.
Conclusion
A V5 submersible pump can be a useful choice for farms, buildings and industrial sites that need a dependable water supply. Before buying, compare the pump’s power range, borewell size, immersion depth, materials, power requirements and expected water demand. These checks help you select a pump that suits your site rather than choosing by price or horsepower alone.
For buyers looking for V5 Submersible Pump Manufacturers in Ahmedabad, Gujarat, Orbit Submersible Pumps & Motors offers product information and support to help you make an informed choice. Contact Orbit with your application details to check specifications, pricing and availability.
Frequently Asked Questions (FAQs)
Who manufactures V5 submersible pumps in Ahmedabad, Gujarat?
Orbit Submersible Pumps & Motors is based in Ahmedabad, Gujarat, and offers V5 submersible pumps for agricultural, residential and industrial applications. Contact the company to confirm the current model and availability.
What is the HP range of the Orbit V5 submersible pump?
Orbit lists 3 HP to 5 HP for single-phase models and 4 HP to 12.5 HP for three-phase models. Confirm the exact configuration before ordering.
What is the maximum immersion depth of the V5 pump?
The listed maximum immersion depth is up to 250 metres. The installation depth and operating point should be checked against the model specifications.
What materials are used in the Orbit V5 pump?
The product information lists an SS 304 stator shell, an AISI 420 stainless steel motor shaft, graded cast-iron upper and lower housing, and a stainless steel motor base.
Can a V5 submersible pump be used for agriculture?
Yes. The V5 is listed for irrigation and sprinkler systems, along with residential and industrial water supply. Select the model based on the field’s water demand and pumping conditions.
How do I select the right V5 pump for my borewell?
Check the borewell diameter, water level, total head, required flow and available power supply. Share these details with Orbit or a qualified pump professional before selecting a model.
How can I buy an Orbit V5 submersible pump?
Visit https://orbitsubmersiblepump.com/product/v5-submersible-pump/ or call +91 97144 63329 / +91 99984 07644. You can also email info@orbitsubmersiblepump.com to request product details and a quotation.
